The advantage of the hose crimping machine
First, the fully enclosed water tank ensures that the water in the circulation and the laser tube is dust-free and clean, prolongs the service life of the laser tube, and effectively reduces the production cost.
Second, the advanced shifting system realizes the function of instantaneously shifting the speed and self-adjusting the speed according to the needs of the curved and straight lines during the cutting process, so that the cutting edge is smooth and the corner curve is natural.
Third, the software automatically typesetting function. After the cutting pattern is designed, the software automatically formats and the materials are closely matched to reduce waste.
Fourth, the Singapore imported metal molybdenum reflective lens and gallium-focused lens, resistant to sputum, high temperature, no need to change frequently, reduce the cost of use, fine spots, uniform light.
Fifth, the hydraulic hose crimping machine uses the Taiwan silver linear motion guide rail to ensure that the laser head is smooth, high speed and non-jitter during operation. With the characteristics of small slit, high speed and high precision, the accuracy and service life of the hose pipe press machine are guaranteed.
According to the relevant professional introduction, the hydraulic hose crimping machine is to expand and shrink the tube end face under normal conditions, and the hydraulic automatic automatic tube end processing machine controlled by the integrated control touch screen screen can replace the tube to expand the tube. , tube shrinkage, drum kit, ribs and other tube end processing, can be freely determined according to user needs to use manual, jog or automatic processing machine tool from the fuel tank, bed, slider, main cylinder, mold core (optional), Main components such as limit cylinder, compression cylinder, clamping die and axial positioning cylinder, axial positioning angle iron.
Generally speaking, it can adjust the working speed of the main cylinder by setting the tubular throttle valve on the main cylinder circuit; the superimposed hydraulic control check valve is arranged on the compression cylinder circuit to ensure the mold clamping process. It is not loose; the superposition type two-way throttle valve is arranged on the shift cylinder, the limit cylinder and the axial positioning cylinder circuit, and the bidirectional movement speed of the above cylinder can be adjusted. The shifting cylinder and the limiting cylinder cooperate with the conversion station, so that the station conversion is convenient and accurate, and the processing quality of the pipe fitting is ensured.
The use of the hose crimping machine is also dangerous. Therefore, in order to ensure its safe operation, it must be carried out in strict accordance with the relevant regulations.
1. The operator of the
hose pipe press machine must be trained to be familiar with the structure and performance of the equipment and master the knowledge of the operating system. And wear protective protective equipment as required, and wear protective glasses that meet the requirements in the vicinity of the laser beam.
2. Obey the safe operation rules of general crimp machine. Start the laser in strict accordance with the laser start-up procedure. When the equipment is started, the operator must not leave the post or the person to be in charge. If it is necessary to stop, stop or cut off the power.
3. When an abnormality is found during the processing, it should be stopped immediately, and the fault should be eliminated or reported to the competent personnel in time.
4. Observe high pressure safety regulations when repairing. Every 40 hours of operation or weekly maintenance, every 1000 hours of operation or every six months of maintenance, in accordance with the regulations and procedures.
5. After starting the machine, the machine should be started in the low speed X and Y directions to check whether there is any abnormality. After entering the new part program, you should try it out and check its operation.
In order to ensure the efficiency of the electric liquid compression hose machine, the following points must be achieved in the process of use:
1) The electric liquid compression pipe machine should be kept in a clean and dry place, and the interface of the hydraulic pipe should be kept clean to prevent contamination with other grease and debris.
2) The electrical part of the electric liquid compression pipe machine shall be inspected and tested regularly. If it is qualified, it shall be inspected and tested in its outer casing. The certificate shall be inspected within the validity period before use.
3) Check that the force cleat of the electro-hydraulic compression tube machine should be free from cracks and deformation, and the movable splint should be intact and not deformed.
4) The metal outside the electro-hydraulic compression tube machine should be reliably grounded and connected with a leakage protector.
5) The electric liquid compression pipe machine should be set up for maintenance and maintenance by the special person. Check the leakage of the hydraulic system frequently. If it is found that there is oil leakage, it should be treated or replaced in time.
